Inhaltsverzeichnis
- Glass Spectrophotometer Cuvettes, For Chemical Laboratory
- Micro Cell With Frosted Walls And Lid Type 18
The UV cuvettes are chemically stable and suitable for use with most organic solvents and weak acids and bases. Cuvettes are a crucial piece of equipment in laboratories that are utilizing light transfer reading. Manufactured with quartz, glass, or plastic and coming in disposable or reusable options, the specific cuvette that is needed for your laboratory can be found at Pipette.com.
- Fingerprints and droplets of water disrupt light rays during measurement, so low-lint gauze or cloth may be used to wipe clean the outer surface of a cuvette before use.
- The width determines the length of the light path through the sample, which affects the calculation of the absorbance value.
- These cuvettes may hold up to 4.375 mL when filled to the edge, but the cuvette volume is determined at 80% capacity.
- The connected sides are highly transparent with a nice exterior and greatly promote the rate of products with high quality.
- PS and UV-cuvettes can be used in temperaures up to 70 °C.
- It is more resistant to chemical attack from the sample solution than other types designed for fluorescence measurements.
A cuvette is, in its basic level, fundamentally a test tube designed for use with optical analysis. Standard cuvettes are generally square or rectangular in cross section to avoid refraction artefacts. Depending on what part of the spectrum is under consideration, they may be made of quartz or optical glass although plastic cuvettes do exist for less demanding measurements.
Glass Spectrophotometer Cuvettes, For Chemical Laboratory
Cuvettes to be used in circular dichroism experiments should never be mechanically stressed, as the stress will induce birefringence in the quartz and affect the measurements made. All of our cuvettes also come with a range of lids and stoppers including PTFE lids and PTFE stoppers. The sample type and the processes you intend to complete can influence your cuvette selection.
Micro Cell With Frosted Walls And Lid Type 18
Made from JGS1 UV-grade fused silica, absorption onset occurs below 170 nm and there are no absorption bands situated between 170 nm and 250 nm. Exceptionally high transmittance across the UVB, UVA, visible spectrum, and near IR. The transmission spectra for our UV quartz cells can be seen below. When working in the IR spectra, especially for wavelengths greater than 2000 nm, we recommend IR Quartz Glass Cuvettes instead, as they offer high transmission for these wavelengths. Some cuvettes will be clear only on opposite sides, so that they pass a single beam of light through that pair of sides; often the unclear sides have ridges or are spectrophotometer cuvette size rough to allow easy handling.
Receive The Latest Promotions And Special Offers
The sample cell contains a solution of the substance you are testing, usually very dilute. Cuvettes are referred to by the distance between the inside faces of opposing cuvette walls, representing pathlength , that the spectrometer light travels through the sample during the measurement. 1, 5, and 10 mm are common, although shorter and longer pathlengths are used for special purposes. A standard 10 mm cuvette has exactly 10 mm between the inside walls of the cuvette, giving a sample pathlength of 10 mm.